Ckun
ET618 7 ID mapping network cable tester with multifunction meter 2 in 1, multi-purpose telephone line network cable length continuity test in one
ET618 7 ID mapping network cable tester with multifunction meter 2 in 1, multi-purpose telephone line network cable length continuity test in one
常规价格
$80.99 USD
常规价格
$109.00 USD
促销价
$80.99 USD
单价
/
单价
The single device includes an Ethernet cable tester, wire tracker, and multimeter. Press "Mode" for circuit tracing,DMM for multimeters, and switch functions easily. The tester can be used for communication wiring, engineering maintenance, radio tracking, manufacturing, laboratory and so on.
Equipped with a professional analog tone generator, the sound is louder when approaching the target cable. The sensitivity of the sensor can be adjusted via the wheels on the wire tracker receiver to narrow the tracking range. The silent vibration mode also avoids interference.
Length calibration can measure network cables, telephone cables and video coaxial cables up to 500 meters. Manual calibration is optional to ensure accurate results. The Ethernet wiring diagram of the RJ45 connector can be displayed on the display or through 8 indicators on the by-wire receiver.
Multifunctional meters can measure or test temperature, continuity, voltage, current, resistance, diode, NCV and more. The package contains all the necessary accessories for measurement.
The main unit is equipped with a replaceable 1250mAh lithium battery. Charge for 3 hours via 5V/2A charger, can work continuously for 8 hours or several months standby time. The receiver uses a 9V battery for up to 2 hours of continuous operation.
Equipped with a professional analog tone generator, the sound is louder when approaching the target cable. The sensitivity of the sensor can be adjusted via the wheels on the wire tracker receiver to narrow the tracking range. The silent vibration mode also avoids interference.
Length calibration can measure network cables, telephone cables and video coaxial cables up to 500 meters. Manual calibration is optional to ensure accurate results. The Ethernet wiring diagram of the RJ45 connector can be displayed on the display or through 8 indicators on the by-wire receiver.
Multifunctional meters can measure or test temperature, continuity, voltage, current, resistance, diode, NCV and more. The package contains all the necessary accessories for measurement.
The main unit is equipped with a replaceable 1250mAh lithium battery. Charge for 3 hours via 5V/2A charger, can work continuously for 8 hours or several months standby time. The receiver uses a 9V battery for up to 2 hours of continuous operation.