Ckun
OWON Oscilloscope HDS2202S 3-in-1 digital handheld oscilloscope with 200MHz bandwidth 3.5-inch LCD 2+1CH(oscilloscope + multimeter + waveform generator)
OWON Oscilloscope HDS2202S 3-in-1 digital handheld oscilloscope with 200MHz bandwidth 3.5-inch LCD 2+1CH(oscilloscope + multimeter + waveform generator)
2+1 CH:3 in 1 multi-function oscilloscope, built-in 1 CH waveform generator, portable oscilloscope, easy for you to work. Has accurate detection function, waveform generator and useful oscilloscope trigger ability is good, resolution of 20,000 counts.
HDS2202S:200MHz bandwidth; 1GSa/s sampling rate; 8K record length; 10,000 wfrms/s waveform refresh rate; 8-bit vertical resolution; 10mV/ div-10V /div vertical sensitivity; 6 test modes; Maximum input voltage :AC 750V/DC 1000V; Maximum input current :DC 100000000000000000. 0A/AC 10. A:
Generator parameters :25MHz signal generator; 125MSa/s sampling rate; 20 mVpp-5 Vpp amplitude range (high impedance); 8K waveform length; 14-bit vertical resolution; 50Ω output impedance; Frequency output: sine (0.1Hz-25MHz), square/pulse/arbitrary (0.1Hz-5MHz), ramp (0.1Hz-1MHz).
Clear LCD display: The 3.5-inch color LCD display has adjustable brightness and backlight time, even in dim ambient light or outdoor environments, digital oscilloscope reading is intuitive. Practical and intuitive menu page layout, it is intuitive and easy to use.
Power supply: Built-in standard 18650 lithium battery, can work continuously for about 6 hours. Single battery can supply normal power. Also supports USB Type-C interface charging, easy to charge or purchase replacement, easy to work anytime and anywhere
Share
3in1 Multi-function Oscilloscope
(2+1CH Oscilloscope+Multimeter+Generator)
Oscilloscope
- Max 10,000 wfms/s waveform refresh rate
- Dual channels input, bandwidth up to 200 MHz, real-time sampling rate 1GSa/s
- Max 8k record length
- Cursor measurement function, Multiple auto measurement, XY function
- One-key auto set function, easy to detect and debug
Multimeter
- 20,000 counts, true RMS+ Standard voltage, current, resistance, diode, capacitance measuring and continuity test
- Auto range function, easy to detect and debug
- Max AC 750V, DC 1000V input voltage
- Independent input of multimeter and oscilloscope
Waveform Generator
- Max 25MHz frequency output+ Output sine, square, ramp, pulse,and built-in special waveforms+ 0.1Hz frequency resolution
- 14-bit vertical resolution, 125MSa/s high sampling rate
- Max 5Vpp output amplitude
Two acquisition modes
- Peak detect is used for the detection of the jamming burr and the possibility of reducing the confusion.
Cursor measurement function supports
- Measuring the voltage difference between cursors (4V)and the time difference between cursors (△T).
7 kinds of auto measurement
- Frequency, Period, Amplitude, Max, Min, Mean and PK-PK.
- Max 6 auto measurements can be displayed on
Multifanctions of Handheld Oscilloscope
-
For Electrical Engineering
Discover intermittent DC voltage drops or issues with industrial equipment and sensors;
-
For Electronic Circuit analysis
Wide usage, other range in heavy electrical, low voltage prototyping, delicate repairs and so on;
-
For Electronic Circuit Analysis
Multiple function to meet your demand, also suitable for school education experiment courses;
-
For Automotive Electronic Circuit
Wide usage, digital oscilloscope can be practical in automotive diagnostic job to detect the injectors and ignition coils or other.